As the intermediate floorstander in our
high-end luxury Palladium™ Series, the P-38F
features the flagship P-39F’s technology and
gallery-like appearance in a slightly smaller, but
equally stunning package.
The P-38F’s carbon-infused, thermoset
composite dual-horn configuration is unique
to the Palladium family. It consists of a propri-
etary tweeter design, combining a chambered
phase plug and Tractrix
®
Horn for extended
high-frequency response; a second 90º by 60º
acoustically damped Tractrix Horn is coupled
to the midrange driver, resulting in precise
performances.
The three low-frequency drivers employ 8"
hybrid cone woofers, powered by a three-
part neodymium magnet structure with dual
stabilizing rings. Four ports on the rear of the
speaker enhance low-distortion bass response.
Each woofer’s voice coil responds accurately
to the smallest signal modulation, yet can also
handle the high power of the most demanding
soundtracks.
Designed with an eye toward home interior
and furniture designs, the P-38F has a signa-
ture style that blends classic Klipsch audio
and a clean, contemporary look. Its unique
enclosure hints at the power inside, while
maintaining a high degree of beauty. Next to
its shape, the most striking visual statement is
the zebra-grain Linia veneer available in
natural, merlot or espresso. The horizontal
linear grain and absence of visible fasteners
further add to its appeal.
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2008
Floorstanding Loudspeaker
• Elegantly balances performance and lifestyle
• Remarkably precise and detailed reproduction of sound
• Superior, low-distortion bass response
• Gallery-like appearance ts beautifully into any décor
P-38F
frequency response 40Hz-24kHz +/-3dB
low frequency extension 29Hz
high frequency extension 30kHz
power handling 300W continuous / 1200W peak
recommended amplifier power 50 - 750W
sensitivity 98dB @ 2.83V / 1m
nominal impedance 4 ohms
mid-frequency crossover 550Hz
high frequency crossover 3400Hz
maximum acoustic output 122dB (2 speakers in-room)
high frequency driver 0.75" (1.9cm) titanium diaphragm
compression driver mated to
90° x 60° Tractrix
®
Horn
mid-frequency driver 4.5" (11.4cm) aluminum diaphragm
compression driver mated to
90° x 60° Tractrix
®
Horn
low frequency drivers Three 8" (20.3cm) high-output,
aluminum / Rohacell
®
/ Kevlar
®
hybrid cone woofers
enclosure material Constrained layer MDF
(medium density fiberboard)
enclosure type Bass-reflex via quad rear-firing ports
height 50.25" (127.6cm)
width 10.75" (27.3cm)
(12.75" / 32.4cm at the base)
depth 21.5" (54.6cm)
weight 122 lbs (55.4kg)
finishes Zebra-grain Linia veneer in natural,
merlot or espresso stain
SpecificationS
Comentarios a estos manuales